Everything You Need To Know About Car Battery Replacement

Automotive car batteries do not last forever. If you notice any sign of poor performance, it is your responsibility to check the car battery and replace it with a new one if required. You should know when to change the battery and it is not very crucial to get this job done in a car service center. If you have the basic knowledge, you can purchase a battery by paying the Amaron or Exide car battery price and replace it all by yourself. Be sure of the car model and information about the engine size. This is important because automotive batteries vary in size and electrical capacity and you have to purchase a battery that is compatible with your vehicle.

• Set up a proper and secure working environment before you start to replace the car battery. Park your car on a flat, level surface and at a safe distance from traffic, sparks or open flames. Make sure you put on gloves and safety goggles because a battery consists of electrolyte solution which is highly flammable.
• Remove the cigarette lighter and plug in the memory keeper into the lighter socket.
• Make sure that all the information of radios and navigation systems do not get erased when you disconnect your old battery. 
• If your car does not have an automatic hood which holds itself up, make sure you use the prop rod to keep it open while you are working. 
• Locate the battery and identify the positive and negative terminals of the old car battery. The positive terminal is often red in color and the negative terminal, black in color. 
• Disconnect the negative terminal and loosen the negative cable clamp with a wrench (Usually 8mm or 10mm). Slide the clamp off of the terminal after it gets loosened.
• It is very important to disconnect the negative terminal socket before the positive terminal socket because you may cause a short circuit in the positive terminal.
• Disconnect the positive terminal later on and remove the car battery. 
• Unfasten the battery holder and remove any screw, clamp or bar which holds the battery in place. 
• Put in the new battery
• Consider repairing or replacing by a mechanic if the terminal ends or the cables are corroded. 
• Replace the battery with the positive and negative terminals on the correct sides. Connect all the screws, clamps or bars that hold the battery in place.
• Reconnect the positive and negative terminals and also tighten the clamps using a wrench.
• Apply the battery lithium grease and also spray the terminals with lithium grease to prevent corrosion.
• Close the hood of the car.

If you are installing the battery on your own, make sure that you buy an Amaron battery online as they are one of the premium car battery brands that dominate the market. 

5 Ways To Increase The Shelf Life Of Your Car Battery

Considered to be one of the most important elements of a car, a typical car battery usually lasts up to 5 years. There are many factors that affect the shelf life of a car battery and once it is exhausted, owners usually have to buy a new Amaron or Exide car battery in India. However, it is better to take extra caution to maintain the shelf life of their car battery so that you do not have to invest in another battery. Mentioned below are a few ways on how you can do it. 

Don’t Take Short Rides 

Short rides limit the ability of your car battery from getting fully charged. Hence, experts recommend avoiding short rides frequently. Extended driving periods fully recharge your car battery. If you don’t use your car that often, we suggest getting a portable car battery charger that can maintain the shelf life of your car battery.  

Proper Installation 

Proper installation of your car battery removes the potential of it vibrating when the car is driven on bumpy roads that eventually lead to internal damage. The continuous vibration often makes the car battery case to crack that reduces its efficiency in the long run. Also, it increases the chances of the battery to fail in the middle of a journey.  

Make Sure to Turn the Lights off 

Although car owners are usually careful when it comes to taking care of the car, people often forget to turn the headlights or cabin lights off. This is bound to take a toll on your car battery’s shelf life. Car owners should make it a habit to check all the lights before exiting the vehicle.   

Protect it From Corrosion 

Over a period of time, battery terminals are bound to get corroded. In order to increase its shelf life, you must wipe it with a dry cloth from time to time. You can scrub the terminals with a tooth brush. In case, you feel that the battery is very dirty, clean it up with a mixture of baking soda and cold water. 

Take Care of the Entire Car 

Just taking care of the car battery won’t be enough to increase its shelf life. You need to take care of other parts as well in order to keep it in the right condition. Make sure you are equally taking care of the head lights, clutch plate, and brakes, like you are taking care of the battery.   

In case of replacement, we suggest you ordering Exide or Amaron battery online as the price of these batteries is comparatively cheaper than other ones.  

How to Restore Your Car Headlights

Car headlight lenses are usually made of strong polycarbonate plastic which is ideal for taking on harsh road conditions without breaking. However, these lenses find difficulty in surviving the sun. Even though the lenses are coated with UV protective film at the time of manufacturing, the coating gets damaged by UV rays over time. This makes the plastic get oxidized.

If your headlights have started hazing or become yellowish, then it’s a clear sign that the oxidation process has begun. However, there's no need to break into a sweat yet. You can get those headlights looking as good as new again by following these steps:

1. Buy the Essentials

Start by making sure you that have all the materials that you’ll need. You can go for a complete headlight restoration kit, which will include all the necessary parts. If you already have some of the parts, you can buy the others separately. Basically, you will need a few different grits of sandpaper, polishing compound, paste wax, painter’s tape, a couple of microfiber towels and a UV sealant.

2. Clean the Headlights

Begin the actual process by washing the headlight lenses thoroughly with car soap and water. While you're at it, wash a bit of the surrounding areas too so that the painter's tape sticks well in the next step. You can buy quality car headlight cleaning and restoration wipes designed specifically for your vehicle from the very professional Car Fit Experts.

3. Tape off the Headlights

As you’ll be sanding your headlights, it’s important to make sure that you sand only the lenses and not the surrounding paint or trim. For this, use the painter’s tape (and not a duct tape, mind you!) to block off the headlight completely and protect the rest of the car. Doing this will keep the rest of your car protected, even if your hand slips while sanding.

4. Sand Away

This is the most crucial step in the process of restoring headlights. If you get this step right, you will get to see pretty impressive results. Go for the most abrasive sandpaper option; we suggest you begin with 1000 grit. Wet the sandpaper and the headlight. Then sand the lens in straight and horizontal strokes. Make sure that you keep the surface wet at all times as you sand. Otherwise you will end up scratching the lens due to build-up of grit particles.

Repeat this process with the less abrasive sandpapers like the 2000 and then the 3000 grit. Change the direction of your sanding motion to diagonal in this round and opposite diagonal motion in the next. Do not forget to keep the paper and lens wet with water. You can use s hose or spray bottle for that.

5. Polish and Wax

Wipe dry your headlights and polish them with the help of polishing compound and a clean microfiber towel. Rub in the polish in circular motions for a few minutes. After that, you can take the wax to it. This will clean the headlights with a thorough finish and prepare it well for the final step.

6. Apply UV Sealant

As you have removed the old oxidised sealant completely in the process of sanding, it is time to apply a fresh UV sealant to your headlights. For this, you'll need to wet a paper towel and apply the sealant in sweeping broad strokes. Make sure that there is full coverage and you follow the instructions of the kit very well. Let the sealant cure after application by parking the car in a dry space.

7 Interesting Car Battery Facts That You Didn't Know

Car batteries are extremely dynamic in nature, leading to a vast number of solution areas. The battery powers the engine, the internal components and ensures that there is enough energy for a smooth drive every time. That’s why it’s important to maintain your car battery well, so that you can extend its lifespan well beyond the mean.

Savvy owners opt for quality components and buy Amaron battery online, from trusted dealers like Car Fit Experts. These companies are miles ahead of the competition and can provide batteries that are reliable and genuine.

Here are some interesting car battery facts that you probably didn’t know –

1. A weak battery can affect the charging and starting systems. If you’ve been having trouble starting the vehicle or running certain components through the car, there may be an underlying problem with the battery. It’s good to get a check-up done or to replace the car battery as a whole.

2. A car’s battery can last upwards of 5 years when maintained well. We might have seen examples of batteries dying on the highway or cars not being able to start after an extended period. That’s when the battery hasn’t been maintained in a while and needs a replacement. It’s best to keep your battery charged and ready to go.

3. Early cars started with a crank mechanism. The batteries of yesteryears had a crank mechanism which would charge the battery inside the vehicle. This crank would transfer the energy to the vehicle allowing it to function.

4. The first lead-acid battery was designed in 1859.  French physicist Gaston Planté designed this one of a kind battery that formed much of the basis of which we run our vehicles today. Batteries today also turn chemical energy into mechanical energy, bringing new meaning to efficiency in energy transfer.

5. The weather can play an important role in how your battery operates. Most batteries use a liquid electrolyte solution to hold a charge, which eventually gets affected by the temperature conditions at that point. If you start to smell something off (rotten egg or sulphur) then the battery may have been compromised.

6. If it’s not the battery, then it’s generally the alternator. The alternator is one of the most common components in the vehicle that needs regular maintenance and repair. When the battery doesn’t perform to its maximum potential, there may be an issue with the alternator.

7. The correct battery size is critical. Mechanics and local shops may offer replacements that are from another vehicle. It’s best to avoid that and opt for a well-fitted battery that works for your specific model and make.

Jump-Starting A Car? This Is What You Need To Know

If you are a car owner, you must be aware of jump-starting. It is a method of giving the necessary boost to start your car even when the battery is not functioning adequately. People reckon they know the right techniques and have the required skills to accomplish the same but fail miserably when the time comes. That’s why it is essential to be well-acquainted with the process of jump-starting a car.

Here is our ultimate guide to help you become an expert in the same. Read on to know more: 

Before we take you to the step-by-step guide about jump-starting your car, you must pay heed to the following pre-checkup guides to help you prepare better.

There are many reasons owing to which a car battery dies. Some of them can put the person’s life trying to jump-start a car in danger. So, it is important to inspect the battery before you actually start with the main process -

1. First and foremost, you need to assure your safety. To do so, choose an area away from crowds. Further, use protection for your hands and eyes. Also, avoid leaning on the battery as it can be dangerous.
2. Next, if the battery exudes rotten smell, you can be certain that the car battery is leaking noxious gases and need a replacement. Under such circumstances, check for Amaron or Exide car battery price list (whichever is compatible with your car) and purchase a new one to get it replaced.
3. Excessive heat greatly damages the car. Focus on the heat your car battery is radiating. If the battery is too hot, allow it to cool down before continuing with your journey.

So, now that you are well versed with the pre-checkups, you can move forward with the ‘jump-starting’ process. Mentioned below are the steps required to jump-start a car:

Step-1: First, shut down everything including all electrical appliances of the car so that the maximum power available is utilized.

Step-2: Now, take the jumper cables and connect one of the red clips to the positive terminal of the dead car battery. Next, connect the second red clip to the positive terminal of the other car. Similarly, connect one of the black clips to the negative terminal of the second car and the other one to the metal surface of your car. Ensure that this metal surface is away from the battery.

Step-3: Allow the engine of the working vehicle run for some time and then turn on the engine of your car. Also, make sure that the healthy battery's engine rev reaches 1,500 RPMs as it drives more charge to the dead car battery.

Step-4: Now, remove the jumper cables in the opposite order starting with the negative clamp fastened to the metal frame of your car.

Once you jumpstart the car, consider visiting a quality car service provider like Car Fit Experts for the replacement of the dead car battery. At Car Fit Experts, we offer great deals in the Exide or Amaron battery for car price and our trained engineers install them in no time.

How To Protect Your Car Battery During Summers

Similar to winters, it is important to protect your car battery in summers as well. The excessive heat trapped inside the hood has an adverse effect on the battery and reduces its lifespan significantly. This is why, car experts recommend parking cars in the shadow of any building.

Besides parking the car in shadow, there are many precautions that a car owner can take to reduce the effect of heat on the car battery. Mentioned below are a few ways:-

Battery inspection

Getting the car battery inspected before it fails to function adequately is crucial. It will save you from getting stranded on the road while you are in the middle of your journey. Simply visit a quality car service provider like Car Fit Experts for inspection. Besides checking the battery, the trained engineers check the brackets to ensure that they secure the battery properly and tighten any loose cable. In case the car battery requires replacement, the engineers will install a new Amaron or Exide car battery.

Self-Inspection

Before visiting a car service provider, self-inspection is always helpful. It helps you to determine the battery condition from the outside. Look for bulging, cracks or fluid leakage from the battery. If you notice any issue, it is essential to buy an Amaron battery online and ask your service provider to replace it. Further, due to the hot weather, the battery fluid evaporates very fast. Checking it from time to time is important as well.

Make sure that the cooling system is performing adequately

The chances of the engine overheating are very high on a hot summer day. If the engine overheats, the car will malfunction and stop. Hence, it is crucial to take the necessary precautions and evade any such situation.

With time, the car cooling system deteriorates and fails to cool down the engine adequately. The engine coolant turns acidic overtime and eats away at hoses and seals. When the coolant fails to perform its task, the engine tends to get overheated. So, flush the cooling system with new coolant periodically.

Periodical Maintenance

Keeping up with maintenance like oil changes, battery tests or mechanical inspections is essential for a functioning and long-life battery. Experts recommend visiting for a check-up during seasonal changes especially.

The battery is the heart of a car. If it fails to perform and requires replacement, buy a new Exide battery in India and visit your service provider to get it replaced. 

This is How a Car Battery Works

It is an undisputed fact that a car cannot function without the car battery. The car battery generates the power required for starting the car. Additionally, other appliances of a car like the spark plugs, glow plugs, lights and electronic applications require energy provided by the car battery as well. 

So, along with the knowledge of the Exide or Amaron battery online price, it is essential to understand how a car battery works. For that, one needs to understand its structure and mechanism. 

1. Components and Structure of a Battery Cell

There are two elements in a battery cell. They are:

• Positive electrode: When talking about a lead-acid battery, it is important to know that it has a positively charged plate, called a positive plate, that consists of lead oxide immersed in an electrolyte. Also, there is a positive grid which consists of a lead alloy used to hold the active material.
• Negative electrode: The negatively charged plate, which is a part of this electrode, consists of pure lead immersed in an electrolyte. Similar to the positive grid, the negative grid serves the same purpose as well. 

2. Function of a Car Battery

The main function of a car battery is to store energy in chemical form and then convert it into electrical energy. This electrochemical process involves the reaction of four materials, namely hydrogen, oxygen, lead, and sulfur. The working of a car battery is explained in the following steps:

• The electrolyte, which is a mixture of sulfuric acid and distilled water, decomposes in positively charged hydrogen ions and negatively charged sulfate ones. When this happens, the electrons travel from the negative end to the positive one through the external consumer.
• To make up for the flow of these electrons, sulfate ions move from the electrolyte into the negative electrode and react with the lead, resulting in lead sulfate. 
• The same lead sulfate is produced in the positive electrode. Bonding of oxygen in the lead oxide is broken up with the help of transfer of electrons and then the oxygen passes through the electrolyte. In this scenario, the remaining lead reacts with the sulfate from the electrolyte. 
• When this happens, the oxygen bonds with hydrogen to create water, and as the sulfuric acid is used for the formation of lead sulfuric, the concentration reduces. Only when the concentration of sulfuric acid dips below a certain level, the battery needs to be recharged. 

So, the next time you are purchasing an Amaron or Exide car battery, you will be able to judge for yourself the technicalities and structure of the same.